Mro™ (miniature Rifle Optic) Trijicon Reviews : Best Price!! Where I Can Get Online Clearance Deals on Mro™ (miniature Rifle Optic) Trijicon Save More!
 
Content:
Mro™ (miniature Rifle Optic) Trijicon. The Trijicon MRO™ (Miniature Rifle Optic) is a sealed miniature reflex sight intended for use on rifles, carbines and shotguns to provide ...
Mro™ (miniature Rifle Optic) Trijicon. by admin www.brownells.com

The Trijicon MRO™ (Miniature Rifle Optic) is a sealed miniature reflex sight intended for use on rifles, carbines and shotguns to provide fast target acquisition. The large aperture and tapered light path maximizes the viewing area and allows for better situational awareness and fast target engagement – especially from non-standard shooting positions. Combine all this with the ambidextrous brightness controls, sub-flush adjusters, advanced lens coatings and the fully sealed, waterproof, hard anodized forged 7075-T6 housing and you have the ultimate mini reflex sight on the market.

The front, or objective lens is installed at a precise angle in order to reflect the red dot back to the user's eye.


Big Book Catalog, Issue:71, Page:280

SPECS:

  • Large Viewing Area
  • Eight brightness settings with Mid-position "off"
  • Ambidextrous Brightness Control
  • Easy-to-Set Adjusters with 1/2 MOA increments.. No special tools required
  • 7075 Aircraft-Grade Aluminum Housing
  • Surface-Flush Adjusters eliminates snag hazards
  • Multi-Coated Lenses for superior clarity and light gathering.
  • Parallax-Free
  • 5 years of continuous use at day-setting 3 on a single CR2032 lithium battery
  • Limited Lifetime Warranty

View Full Trijicon MRO™ Spec Sheet Here


Protac Rail Mount Streamlight. The ProTac series expands into weapon-mounted lights with this light featuring a dedicated fixed-mount for Picatinny rails. It uses either a remote ...
Protac Rail Mount Streamlight. by admin www.brownells.com

The ProTac series expands into weapon-mounted lights with this light featuring a dedicated fixed-mount for Picatinny rails. It uses either a remote switch with momentary/constant on operation or a standard push-button tail switch, and can run on either a lithium battery or an easy-to-find alkaline battery.

ProTac Rail Mount 1 Specs:

  • Dual fuel - uses one AA alkaline or CR123A lithium battery (both included); also accepts AA lithium
  • CR123A lithium battery output:
  • High: 350 lumens; 12,000 candela; 219m beam; runs 1.75 hours
  • Low 40 lumens; 1,380 candela; 19m beam; runs 14.5 hours
  • AA alkaline/AA lithium battery output:
  • High: 150 lumens; 4,950 candela; 141m beam; runs 1.5 hours (alkaline); runs 4.5 hours (AA lithium)
  • Low: 40 lumens; 1,380 candela; 19m beam; runs 8 hours (alkaline); runs 14 hours (AA lithium)
  • Strobe for signaling or disorienting
  • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
  • Remote pressure switch features momentary and “constant on” operation
  • Integrated rail clamp attaches to MIL-STD-1913 rails
  • Easy to attach, secure mounting
  • Includes remote pressure switch, push-button tail switch, remote retaining clips, double-sided tape and zip ties
  • Durable, anodized aluminum construction with impact-resistant tempered glass lens
  • IPX7 rated with the Standard button switch installed; waterproof to 1 meter for 30 minutes.
  • IPX4 rated with the Remote Pressure Switch installed
  • Operating temperature: -40°F to +120°F
  • Limited lifetime warranty
  • RoHS compliant

ProTac Rail Mount 2 Specs:

  • TEN-TAP® Programming - choice of three operating modes: 1.) high/strobe; 2.) high only; 3.) low/high
  • High: 625 lumens; 22,000 candela; 297m beam; runs 2 hours
  • Low: 60 lumens; 2,000 candela; 89m beam; runs 21 hours
  • Strobe for signaling or disorienting
  • Remote pressure switch features momentary and “constant on” operation
  • Integrated rail clamp attaches to MIL-STD-1913 rails
  • Easy to attach, secure mounting
  • Includes remote pressure switch, push-button tail switch, remote retaining clips, double-sided tape and zip ties
  • Uses two CR123A lithium batteries (included)
  • Durable, anodized aluminum construction with impact-resistant tempered glass lens
  • IPX7 rated with the Standard button switch installed; waterproof to 1 meter for 30 minutes.
  • IPX4 rated with the Remote Pressure Switch installed
  • Operating temperature: -40°F to +120°F
  • Limited lifetime warranty
  • RoHS compliant

Protac Rail Mount HL-X Long Gun Light Specs:

The ProTac Rail Mount HL-X is a 1,000 lumen weapon-mounted light featuring a dedicated fixed-mount for Picatinny rails. It uses either a remote switch or a standard push-button tail switch, and can run on multiple battery sources.

  • High for maximum illumination: 1,000 lumens; 332m beam; runs 1.25 hours (CR123A batteries); runs 1.5 hours (18650 battery); 27,600 candela
  • Low for extended run time: 60 lumens; 80m beam; runs 20 hours (CR123A batteries); runs 23 hours (18650 battery); 1,600 candela
  • Strobe for signaling or disorienting: runs 2.5 hours (CR123A batteries); runs 3.25 hours (18650 battery)
  • Dual fuel - uses two CR123A lithium batteries (included); also accepts one Streamlight rechargeable 18650 lithium ion battery
  • Easy to use pressure switch comes with a button for on/off and a pressure switch for momentary activation.
  • Integrated rail clamp attaches to MIL-STD-1913 rails
  • Durable, anodized aluminum construction with impact-resistant tempered glass lens
  • IPX7 rated with the Standard button switch installed; waterproof to 1 meter for 30 minutes.
  • IPX4 rated with the Remote Pressure Switch installed
  • Operating temperature: -40°F to +120°F
  • Anti-roll head
  • Includes two CR123A lithium batteries, remote pressure switch, push-button tail switch, remote retaining clips, double-sided tape and zip ties
  • Solid State power regulation provides maximum light output throughout battery life
  • RoHS compliant